How to clean PVC Paver Tile moulds ?

June 08, 2023

ARJUN POLYMERS - +91 8080083417/9699090872

To clean PVC paver tile moulds, you can follow these simple steps:

1. Prepare a cleaning solution. Mix a mild detergent or dish soap with warm water in a bucket or basin. Alternatively, you can use a commercial PVC cleaner if one is available.

2. Remove loose debris: Use a brush or broom to remove any loose dirt, debris, or residue from the paver moulds.

3. Scrub the moulds: Dip a soft-bristle brush or sponge into the cleaning solution and scrub the PVC paver moulds thoroughly. Pay special attention to any stubborn stains or marks. For tougher stains, you may need to use a scrub brush.

4. Rinse with water: Once you've scrubbed the moulds, rinse them with clean water to remove the cleaning solution and any remaining dirt.

5. Allow to dry: Place the cleaned PVC paver moulds in a well-ventilated area to air dry completely. Make sure they are completely dry before storing or reusing them.

Optional: Apply a protective coating (if desired): If you want to provide additional protection to the PVC moulds, you can apply a thin coat of PVC mould release agent or a non-stick cooking spray. This can help prevent sticking and make future cleaning easier.

Remember to always follow the manufacturer's instructions and recommendations for cleaning and maintenance of your specific PVC paver moulds.

_____________________________________________________

M/s. Arjun Polymers, India, are a Manufacturer & Exporter of all kinds of Pvc Plastic Products .ARJUN 's Product list includes :-

1.Complete Plant Setup for Paver/ Tile Block Industry 2.Vibrating Table, Concrete Mixer, Colour Mixer,

3. All types of Paver / Tiles/ Kerb Stone moulds,

4.Chemicals & Synthetic Iron Oxides

5.Soft PVC Compounds / Raw Materials

6. Medical Grade , Shoe Soles, Paver Compounds

7.Cables & Wires, PVC Sleeves, Pipe and fittings, Toys

8. PVC Resin & Calcium Carbonate

9 Injection molding Plastic Dies & Molds

10. Thin Wall Containers, Blow Molds,